Chimney Company in Wilsonville - Flat-Price Sweep, Photo Report Included

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 473-8720

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Wilsonville, OR

Chimney Inspection in Wilsonville starts with one question we ask on nearly every call: what are you burning, and how often? Wilsonville’s mix of 1990s subdivision homes around Charbonneau, newer builds at Villebois, and older small-lot houses near the Willamette means a single day of inspections can move from a factory-built fireplace with a straight flue to a creosote-heavy pre-1970 insert with an offset chase. The Willamette Valley’s cool, wet winters and frequent valley inversions compress most burning into a short fall-winter window, so the flue sees heavy use fast. We inspect the whole system, tell you honestly what it needs, and set the price per job by a written estimate. Call (855) 473-8720.

Call (855) 473-8720

Why Wilsonville Homes Are Different

Wilsonville sits in the Willamette Valley’s soft-wood belt, and that single fact reshapes most of the chimney work here. Douglas fir and bigleaf maple drop needles and burn hot and fast, and fir smoke leaves a sticky, resinous creosote that glazes into hard, tar-like stage-three deposits far sooner than the hardwood fires most homeowners assume they’re running. A chimney that looked fine in October can carry a tough glaze by January.

The housing stock adds a second layer. Charbonneau’s 1980s through 2000s subdivision homes, the Villebois and Old Town areas, and the older river-town core near the Willamette all sit within the same 97070 code, but their flues are built differently. A modern tract-home factory fireplace with a straight flue behaves nothing like an older insert with an offset chase, and the sweeping method has to follow the flue, not a script. Many newer builds vent gas inserts through a chimney chase that still needs annual attention. And because state-declared burn bans and valley inversions squeeze burning into a narrow season, homeowners here want the sweep done before the first cold snap, not after. Damp shoulder seasons also let moss, debris, and bird nests build up in caps and crowns.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Wilsonville Services

Two jobs account for most of the calls we take in Wilsonville: a sweep before the burn-ban season, and repair when the flue or crown has finally given out.

Chimney Sweep in Wilsonville

A sweep here means more than brushing a flue. Because valley fir leaves fast-resinous creosote, we scrape and brush the full run of the flue, remove the glaze where it has set, and clear the firebox, smoke shelf, and damper. We check the cap and crown while we’re up there, since damp spring and fall weather lets moss and debris collect on both. A factory-built fireplace with a straight flue sweeps quickly; a creosote-heavy insert with an offset chase takes longer, and the price reflects the job, not a flat menu rate. For the full details on scheduling and scope, see Chimney Sweep in Wilsonville.

Chimney Sweep in Wilsonville

Chimney Repair in Wilsonville

Repair work in Wilsonville usually traces back to water or heat. Wet valley winters work on crowns, flashing, and mortar joints, while heavy fir burns stress flue tiles. When a tile cracks, we can resurface a structurally sound flue with HeatShield rather than defaulting to a full reline, which saves real money. Where a liner genuinely needs replacing, we install DuraFlex flexible liner systems sized correctly to the appliance. Caps and components come from professional supply lines like Gelco and Olympia Chimney, not the hardware store shelf. For scope and pricing, see Chimney Repair in Wilsonville.

Chimney Repair in Wilsonville
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 473-8720

Chimney Inspection in Wilsonville

Chimney Inspection in Wilsonville answers the question a sweep alone can’t: what condition is the whole system actually in? That matters here more than in most towns. The clustered housing eras around Charbonneau and Old Town mean one street can hold a 1990s factory fireplace and a pre-1970 masonry chimney with decades of fir creosote inside, and each needs a different look. Valley inversions and burn bans push heavy use into a few months, so damage compounds quietly between seasons. An inspection is a standalone service, not a sales funnel; you can book one, get an honest read on the flue, and decide what to do next. We perform every Chimney Inspection in-house, so the person who inspects is the person who understands the repair. Our technicians have up to 11 years of experience.

Fireplace Inspection

Signs you need it

You’ve moved into a Wilsonville home with an unknown chimney history, or the firebox shows cracked brick, loose mortar, or smoke staining around the opening.

What it costs in Wilsonville

A fireplace and chimney inspection typically runs $150 – $350, with a Level 2 camera inspection at the higher end.

How we do it

We examine the firebox, damper, smoke shelf, and firebox-to-flue transition, then run a camera up the flue to check for cracks, gaps, and creosote glaze.

Level 2 Chimney Inspection

Signs you need it

A home sale, a recent chimney fire, a liner change, or any flue with an offset chase calls for a Level 2 look rather than a visual-only check.

What it costs in Wilsonville

A Level 2 inspection with video scanning typically costs $250 – $450 depending on flue length and access.

How we do it

We run a video camera the full length of the flue, document joints, tile condition, and offsets, and provide a photo record of what we found.

What Chimney Inspection Costs in Wilsonville

Item Typical range in Wilsonville
Visual chimney and fireplace inspection $150 – $250
Level 2 inspection with video scanning $250 – $450
Inspection bundled with a sweep $200 – $400

Does a Wilsonville chimney really need inspection every year?

Yes, especially with fir smoke. Annual inspection catches glazed creosote and early tile cracks before they become expensive, and it confirms the flue is clear before burn-ban season starts.

Can an inspection tell me whether I need a reline or resurfacing?

That’s exactly what it’s for. The camera shows whether the tiles are structurally sound enough for HeatShield resurfacing or too far gone, in which case a DuraFlex liner is the honest answer. Call (855) 473-8720 for a free estimate.

Brands We Service in Wilsonville

We work with professional-trade brands including HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and we install DuraFlex liner systems. These are specification-grade materials, not retail shelf stock, and sourcing them keeps turnaround predictable because we’re ordering the right part the first time. See the full list on our brands page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 473-8720

Pricing for Chimney Company in Wilsonville, OR

Service Typical range in Wilsonville
Standard chimney sweep $150 – $300
Sweep with glazed creosote removal $250 – $500
Visual inspection $150 – $250
Level 2 inspection with video scanning $250 – $450
Crown repair or rebuild $300 – $900
Cap and crown installation $200 – $600
Flue tile resurfacing (HeatShield) $1,200 – $2,800
DuraFlex liner installation $2,500 – $5,500
Masonry and mortar repair $400 – $1,500
Fireplace damper repair $200 – $500

Heavy glazed fir creosote, offset flues, and taller chimneys push the price up in Wilsonville, because they take more time and tooling to do right. Everything is quoted per job by a written estimate before we start, so the price you agree to is the price you pay.

Neighborhoods We Serve in Wilsonville

We inspect, sweep, and repair chimneys across Wilsonville, from the subdivisions around Charbonneau and Villebois to Old Town and the older small-lot houses near the Willamette. Because burning season is short and demand clusters before the first cold snap, booking a sweep early in the fall is the practical move; call and we’ll find you the next open slot. Reach us at (855) 473-8720 and we’ll confirm dispatch timing for your address.

  • Charbonneau
  • Villebois
  • Old Town Wilsonville
  • Riverside and the Willamette-area core

Service Area – Cities Near Wilsonville

Wilsonville sits at the junction of several valley communities, and we serve homeowners throughout the surrounding area as well. If you’re just outside Wilsonville, we can still help: we work in Canby, OR, Sherwood, OR, Newberg, OR, and Aloha, OR, all of which share the same fir-heavy burn profile and damp winter conditions. Call (855) 473-8720 to confirm coverage for your address and book an inspection or sweep.

Serving Wilsonville, OR – Our Local Coverage Area

We serve Wilsonville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Wilsonville

Ready to get started? Free estimates in Wilsonville
Call (855) 473-8720

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Wilsonville Customers Say

★★★★★ 4.8 from 11+ reviews

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

- Craig Gallagher

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

- Michelle Tran

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

- Renee Hayes

How It Works in Wilsonville

Getting your chimney cleaning project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Wilsonville. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7