Chimney Repair in Wilsonville, OR | Chimney Sweep Hillsboro

Chimney Repair in Wilsonville - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Wilsonville

Chimney repair in Wilsonville usually starts with a simple question: what is actually wrong inside that flue? The answer differs block by block here. A 1990s tract-home factory fireplace around Charbonneau and a pre-1970 masonry stack near the Willamette need very different work, and we treat them that way. Our technicians have up to 11 years of experience, and every repair begins with a camera inspection you can watch with us. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 473-8720 and we will book a sweep or repair visit before the fall crunch.

Call (855) 473-8720

Why Wilsonville Homeowners Call Chimney Sweep Hillsboro for Chimney Repair

Wilsonville sits in the Willamette Valley’s soft-wood belt. Douglas fir and bigleaf maple drop needles and burn hot and fast, and that changes how a chimney ages here. Glazed, tar-like creosote builds far quicker than most homeowners expect from the hardwood fires they think they’re burning. A flue that looked fine in October can carry a hard glaze by January. That is the single biggest reason we get called out to Wilsonville homes.

The housing split makes it more interesting. Around Old Town and the older river-town core, we regularly meet masonry fireplaces with unlined or clay-tile flues that were never sized for the appliances now venting into them. Out toward Villebois and the subdivisions, it’s mostly factory-built fireplaces and gas inserts venting through chases with caps that have rusted or gone missing. One day of repair here can mean re-crowning a clay-tile stack and re-capping a factory chase on the same street.

We’re a chimney-only specialist, not a generalist contractor. Sweep, inspect, and repair are all handled by the same company from start to finish, so nothing gets handed off. When you want our chimney repair team, you get people whose entire skill set is built around this one system. No subcontracting, no guessing.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Masonry Repair in Wilsonville

Chimney Masonry Repair in Wilsonville most often means addressing mortar and brick that Willamette Valley damp has worked on for years. Cool, wet winters and damp shoulder seasons drive freeze-thaw cycles through mortar joints and crowns, and once water gets in, spalling follows. A typical masonry repair visit covers repointing the joints, rebuilding a crumbling crown, and patching spalled brick faces. If the flue itself is damaged but structurally sound, we’re certified to apply HeatShield resurfacing, which can save you the cost of a full reline. We’ll tell you honestly which one your chimney actually needs.

A typical repointing or tuckpointing job in Wilsonville runs $450 to $900 depending on height and how much of the stack needs work. Crown rebuilding typically lands between $400 and $800. A full reline with a DuraFlex liner system generally runs $2,800 to $5,500. The written estimate sets the final price.

Repointing and Tuckpointing

Mortar is the soft part of a chimney, and it wears first. Repointing rakes out the failed joints and packs in fresh mortar matched to the existing brick. Tuckpointing is the finer version, used where the joints are shallow and you want the repair to disappear into the wall.

Crown Rebuilding

The crown is the concrete cap at the top of the stack, and it takes the most weather. A cracked or flat crown lets water run straight down the flue. We pour a new crown with proper slope so water sheds away from the chimney instead of into it.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 473-8720

Chimney Cap Installation in Wilsonville

Chimney Cap Installation in Wilsonville solves a problem we see constantly: rain and bird nests working their way into a chase that was never meant to stay wet. Factory-built fireplaces around Villebois and the 1980s-2000s subdivisions often have caps that have rusted through or blown off entirely. Damp shoulder seasons give moss and debris plenty of time to accumulate. A correctly sized cap shed water, keeps animals out, and protects the crown and chase below it.

Most cap installs in Wilsonville run $250 to $550, depending on the flue size and whether we’re matching a factory chase or a masonry stack. We source caps and components from Gelco, Famco, and Copperfield, which means professional supply-line parts rather than what’s on the shelf at the hardware store. We carry the right cap for your flue, not a generic one-size fit.

Matching the Cap to the Flue

A cap that’s too small or loosely fitted still lets water and animals in. We size every cap to the actual flue opening, whether that’s a round factory chase or a rectangular masonry stack.

Flashing and Chase Sealing

Failed flashing around the smoke chamber is one of the quiet causes of interior water damage. We reseal flashing and chase joints as part of the cap install so the top of the chimney is watertight, not just covered.

Trusted Brands We Service in Wilsonville

We work with a portfolio of professional-trade brands: DuraFlex for flexible stainless liner systems, HeatShield for flue resurfacing, and Gelco, Olympia Chimney, Famco, and Copperfield for caps, covers, and components. These are supply lines you won’t find at retail. We don’t claim to stock parts locally, but we source the correct component for your flue and get it installed without delay. Fast turnaround matters here because burn-ban season doesn’t wait.

Common Chimney Repair Problems We See in Wilsonville Homes

  • Cracked clay-tile flues in the older river-town core. Fast-burning fir creosote heats these tiles hard, and the cracks let heat and moisture reach surrounding framing. Once that happens, the flue needs relining before it’s safe to use again.
  • Rusted or missing caps on subdivision factory fireplaces. Around Villebois and the newer subdivisions, missing caps let rain and bird nests rot the chase and crown. It’s a small fix that prevents a much larger repair.
  • Deteriorating mortar crowns and failed flashing. Willamette Valley damp works into cracked crowns and flashing, and freeze-thaw cycles accelerate spalling of the brick. Left alone, the damage moves down the stack.
  • Appliances vented into flues never sized for them. Older Wilsonville homes often have modern inserts or appliances venting into an original clay-tile flue. The mismatch causes poor draft and heavy creosote buildup.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (855) 473-8720

Pricing for Chimney Repair in Wilsonville, OR

Chimney repair pricing in Wilsonville runs across a wide range because the repair scope does. Repointing and tuckpointing typically run $450 to $900. Crown rebuilding lands between $400 and $800. Cap installation generally runs $250 to $550. A full reline with a DuraFlex system runs $2,800 to $5,500, while HeatShield resurfacing, when the flue qualifies, often comes in below a full reline. What drives the cost is height, access, how much of the stack is damaged, and whether the creosote has to be addressed before masonry work begins. Three factors set our price: what the camera shows, the written estimate, and nothing else. Estimates are free.

We Also Serve Cities Near Wilsonville

We work across the surrounding valley, including Canby, Sherwood, Newberg, and Aloha. The same soft-wood creosote and wet-winter masonry wear shows up in all of them, and the same camera-first approach applies. If you’re just outside Wilsonville and want a sweep or repair booked, call and we’ll confirm the details.

Serving Wilsonville, OR – Our Local Coverage Area

We serve Wilsonville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Wilsonville

When a Chimney Repair Can Safely Wait

Not every problem we find needs fixing this month, and we say so plainly. A hairline crack in a crown that still sheds water, a cap that’s intact but weathered, or mortar joints with minor surface wear can often be documented and watched. The camera footage is yours to review. Where a repair cannot wait is when heat or moisture can reach framing, when a flue is cracked, or when creosote has glazed to the point of ignition risk. Those are safety matters, not upsells, and we’ll tell you which category your chimney falls into.

What Happens When You Call

Call (855) 473-8720. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. We start with a Level 2 inspection with camera footage you can watch, then give you a written estimate before any work begins. Estimates are free, and the price is per job by that written estimate. Whether it’s repointing near Old Town or re-capping a factory chase around Charbonneau, you’ll know exactly what your Wilsonville chimney needs before anyone touches it.

Written by the team at Chimney Sweep Hillsboro.

Why Wilsonville Chooses Chimney Sweep Hillsboro

We set the standard for chimney repair in Wilsonville.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Wilsonville

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Wilsonville Customers Say

Trusted by homeowners across Wilsonville and surrounding areas.

★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Craig Gallagher
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Michelle Tran
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Renee Hayes

Ready for Chimney Repair in Wilsonville?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Wilsonville.

(855) 473-8720

Request a Free Estimate in Wilsonville

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7