Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Wilsonville
If your Wilsonville home has a fireplace you’ve never had looked at, or you’ve noticed a smoky smell on cool evenings, we can help. We’re chimney specialists, not general handymen, and we handle sweeping, inspection, and repair with the same team from start to finish. Wilsonville homes tend to sit in that newer 1980s-to-2000s bracket, and the factory-built fireplaces in those houses need a different set of eyes than an old masonry stack. That’s the work we do. For a free estimate, call (855) 473-8720. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Wilsonville Homeowners Call Chimney Sweep Hillsboro for Chimney Sweep
We’re a dedicated chimney company, and that focus matters in a town like Wilsonville where most of the housing stock is newer. A factory-built fireplace has manufacturer-specific flue liners, caps, and dampers, and matching the right replacement part is part of doing the job correctly. Our technicians have up to 11 years of experience, entirely in chimney work, and they know how a prefabricated chase behaves through a Willamette Valley wet season.
Response into Wilsonville is quick. We run fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Because we work in the Wilsonville area regularly, we understand the mix you find here: the tract homes near Charbonneau, the newer builds around Villebois, and the older small-lot houses closer to the river. Each one looks different inside the chase. We’ll tell you plainly what your chimney needs and what can safely wait, and nothing gets recommended without camera evidence you can see for yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Services in Wilsonville
Chimney Services in Wilsonville cover the full cycle: a proper sweep, a Level 1 or Level 2 inspection, creosote and soot removal, fireplace cleaning, and repair when the inspection turns something up. A typical annual sweep and Level 1 inspection in Wilsonville runs about $175 to $280. A Level 2 inspection, which includes video of the flue, runs roughly $250 to $450. Repair work is quoted separately once we know what’s actually wrong. Everything is booked and priced per job by a written estimate, and the estimate itself is free.
Annual Sweep and Fireplace Cleaning
An annual sweep clears soot and creosote from the firebox, smoke chamber, and flue so the system drafts the way it should. In a factory-built fireplace the liner is brushed carefully to avoid damaging the manufactured sections. This is the baseline service most Wilsonville homes need once a year.

Creosote and Soot Removal
Valley fir smoke leaves sticky, resinous creosote that can bake into a hard glaze the brush won’t touch. When we find glazed deposits, we explain the options rather than just sweeping over them. That’s where a trained specialist earns the visit.

Chimney Sweep Certified in Wilsonville
Chimney Sweep Certified in Wilsonville means the technician inspecting your flue has been trained on the systems actually in your house, including factory-built fireplaces and the manufacturer-specific components they use. When a prefabricated chase needs a replacement cap, screen, or liner section, we source professional-grade parts from lines like Gelco, Olympia Chimney, or Famco and match them to your unit. A standard inspection runs about $175 to $250 for a Level 1 and $250 to $450 for a Level 2 with camera work. It’s a standalone service, not a sales funnel.
Level 1 and Level 2 Inspections
A Level 1 inspection covers what’s visible and accessible without dismantling anything, which suits a chimney with a known service history. A Level 2 with a camera is the right call when a home is new to you or the chimney’s history is unknown.
Repair Without the Handoff
When inspection turns up a damaged flue, HeatShield resurfacing can restore a structurally sound but worn liner instead of forcing a full reline. DuraFlex liner systems handle both new installs and replacements. The same team inspects, sweeps, and repairs, so nothing gets passed to a third party.
Trusted Brands We Service in Wilsonville
The components in a factory-built fireplace are manufacturer-specific, and swapping in the wrong cap or liner section causes real problems. We work with professional-grade product lines including DuraFlex flexible liner systems, HeatShield resurfacing, and caps and components from Gelco, Famco, and Copperfield. These are trade supply lines, not hardware-store shelf stock, and we source the right part for your unit rather than forcing a universal fit. That keeps turnaround quick and the work specification-correct. If your inspection shows a supplier issue or a discontinued part, we’ll tell you what’s compatible and what isn’t.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Wilsonville Homes
- Deferred sweeping on a fireplace that looks new. Factory-built fireboxes stay visually clean even as first-degree creosote bakes into a third-degree glaze up the flue. Once it glazes, a brush alone won’t remove it and the conversation shifts toward resurfacing or relining.
- Clogged prefabricated caps and screens. Douglas fir needles and bird nesting debris pack into factory caps through the damp shoulder season, killing draft and pushing smoke back into the room. A quick cap clearing often solves a backdraft complaint.
- Gas inserts with an unswept chase. Gas-insert owners assume there’s nothing to sweep above the insert. The chase the unit vents through still needs its annual look, and that’s where spalling or a loose liner connection shows up.
- Older river-town core houses. The pre-1970 houses near the Willamette often carry creosote-heavy masonry inserts that need a stiffer sweep than a 1990s tract-home factory unit. Same afternoon, very different job.
Pricing for Chimney Sweep in Wilsonville, OR
Pricing here is set per job by a written estimate, and the estimate is free. A typical annual sweep with a Level 1 inspection in Wilsonville runs $175 to $280. A Level 2 inspection with camera work runs $250 to $450. Creosote and soot removal beyond a standard sweep, along with any cap, damper, or liner repair, is quoted once we’ve seen the flue on camera. What moves the number is the amount and type of creosote, whether the chase needs a manufacturer-matched part, and whether a gas insert is involved. A newer home with light deposits sits at the low end. A glazed pre-1970 insert near the river sits higher.
We Also Serve Cities Near Wilsonville
Wilsonville is one of several towns we cover in this part of the valley. If you’re just outside the city limits, we also work in Canby, Sherwood, Newberg, and Aloha. The same full-cycle service applies: sweep, inspect, and repair with the same specialist. Learn more on our chimney sweep service page, or call to book a visit.
Serving Wilsonville, OR – Our Local Coverage Area
We serve Wilsonville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Wilsonville
Because a clean-looking firebox says nothing about what’s built up in the flue above it. In a factory-built fireplace, Willamette Valley fir smoke glazes the liner while the box stays visually fresh, so the deposits hide exactly where you can’t see them. That’s why the inspection camera matters. Call (855) 473-8720 for an exact quote; estimates are free.
A factory-built unit has a manufactured liner, cap, and damper, so the sweep has to match the right part rather than brush any old flue. If a component needs replacing, we source the manufacturer-specific piece from professional supply lines. Old masonry is more forgiving of a generic sweep; a prefabricated chase is not. Call (855) 473-8720 and we’ll tell you which one you have.
Because the soft-wood belt around the valley means Douglas fir needles and fir smoke leave sticky, resinous deposits that glaze faster than hardwood customers expect. A chimney that looked fine last season can carry a hard, tar-like glaze by January. Sweeping before the burn-ban season, not after, is the sensible timing. Call (855) 473-8720 to get on the schedule.
Book before the first cold snap, not after the last fire. Valley inversions and state-declared burn bans squeeze wood burning into a short fall-winter window, so the smart move is a sweep in early fall so the chimney is clear when you actually start burning. The damp shoulder season is also when caps and screens clog, so an early look catches both. Call (855) 473-8720 for a free estimate.
Yes, the chase still needs an annual look even though there’s no wood fire. The insert vents through the chimney, and inspecting that path catches spalling, a loose liner connection, and debris before it becomes a problem. Gas-insert owners skip this most often, and it’s one of the more common issues we find in newer Wilsonville homes. Call (855) 473-8720 to book the inspection.
If your Wilsonville fireplace has gone more than a year without a look, or you’re not sure what’s actually up that flue, get it checked before the burning season. Call (855) 473-8720 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a straight answer, camera evidence, and a written price before any work starts.
Written by the team at Chimney Sweep Hillsboro.