Chimney Company in Portland - Flat-Price Sweep, Photo Report Included

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 473-8720

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Portland, OR

Chimney inspection in Portland starts with a simple reality: the chimney on your house was probably built for wood heat a century ago, and it’s been asked to do a different job ever since. In the Craftsman and foursquare neighborhoods of inner Portland, clay-tile flues that once carried smoke from a fireplace now vent a gas furnace or a wood insert, and the masonry around them has spent a hundred damp winters soaking up rain. That combination – old brick, original flues, a changed heat source – is what our inspectors look at first. Call (855) 473-8720 to book an inspection.

Call (855) 473-8720

Why Portland Homes Are Different

Portland’s long, wet winters are the dominant force on chimney masonry here. The city sees roughly 36 inches of rain a year, and very little of it arrives as a hard freeze. That matters: instead of the freeze-thaw creosote cycles you get in colder mountain towns, the slow, steady moisture is what does the damage. Brick absorbs water, the faces spall and flake off, crowns crack, dampers rust shut, and moss takes hold in the mortar joints.

The housing stock amplifies it. Inner Portland – Irvington, Alameda, Laurelhurst, Sullivan’s Gulch, the 97212 and 97232 ZIPs – is full of 1900s to 1920s Craftsman and Tudor bungalows with tall external brick chimneys. Those chimneys are beautiful and they are also water magnets. Most now serve gas furnaces and wood inserts rather than open fireplaces, which changes what the flue needs to handle and how often it needs a sweep. A 97205 homeowner and a Sullivan’s Gulch homeowner may have identical chimneys and completely different venting demands. That’s why an inspection comes before any recommendation.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Portland Services

Two things bring Portland homeowners to the phone more than anything else: the once-a-year sweep and the repair that follows a wet winter. Both are handled by the same chimney specialists, start to finish.

Chimney Sweep in Portland

A sweep here is rarely just a sweep. On a Portland chimney that vents a wood insert, we’re removing creosote and soot from the flue, but we’re also checking whether the rain has been getting in and whether the damper still seals. When a chimney now serves a gas furnace, there’s far less creosote and more attention to the flue liner and the cap. Either way the flue gets brushed top to bottom, the firebox and smoke chamber get cleaned, and the debris leaves the house with us. If you’re overdue, book a chimney sweep and we’ll tell you what the flue actually needs.

Chimney Sweep in Portland

Chimney Repair in Portland

Portland repair calls usually land on masonry rather than flue internals. After a wet winter, the exterior brick on a 1910s chimney often shows spalling faces and a crown that’s cracked enough to let water straight down into the structure. We handle crown repair, waterproofing, cap and damper work, and relining when the flue tiles are shot. Because we carry HeatShield resurfacing, a structurally sound flue with damaged tiles can sometimes be restored without a full reline. When tear-out is the honest answer, we install DuraFlex. Start with chimney repair.

Chimney Repair in Portland
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 473-8720

Chimney Inspection in Portland

Chimney Inspection in Portland is the service that answers the questions a sweep can’t. On a 1900s to 1920s Craftsman with an original brick chimney, we need to know whether the flue tiles are cracked, whether water has been getting into the masonry, and whether the appliance now hooked to that flue is venting safely. The wet climate makes this more urgent than the age alone suggests: a chimney that looks fine from the curb can be holding moisture deep in the brick. A standalone Chimney Inspection gives you an honest assessment before you commit to any repair.

Chimney Flue Inspection

The flue is the inside of the chimney, and it’s the part you can’t see without a camera. This is where we spend most of an inspection on a Portland home, because the flue has usually outlived its original purpose.

Signs you need it

You’ve smelled a faint smoky or musty odor in the house during damp weather, or the chimney now serves a furnace or insert and nobody has verified the flue since it changed over.

What it costs in Portland

A chimney flue inspection in Portland typically falls within our standard inspection range, with camera work priced by the written estimate before we begin.

How we do it

We run a camera down the flue, check the tiles for cracks and gaps, confirm the liner is sized correctly for the appliance, and record what we find in a photo report you keep.

Level 2 Chimney Inspection

A Level 2 inspection goes beyond the visible flue. It includes the accessible attic and crawl space, the chimney exterior, and the connections between the appliance and the chimney – which is what most 1910s Portland homes need before any repair decision.

Signs you need it

You’ve just bought the house and the chimney history is unknown, or you’ve changed appliances from an open fireplace to an insert or furnace.

What it costs in Portland

A Level 2 inspection in Portland is typically quoted at the higher end of our inspection range, and the written estimate sets the final price.

How we do it

We inspect the accessible portions of the chimney interior and exterior, the attic and crawl space, document clearances, and give you a photo report of every defect found.

What Chimney Inspection Costs in Portland

Inspection pricing depends on how far we go and how much of the chimney is accessible. The written estimate always comes before the work.

Item Typical range in Portland
Standard chimney inspection $150 – $325
Level 2 inspection with camera $200 – $425
Photo report (included with inspection) No added cost

Do I need a chimney inspection if I only burn occasionally?

Yes. Portland’s damp climate means water damage and cracked flue tiles can develop whether or not you’ve been burning, and an inspection is how you find out before a small crack turns into a reline.

Can you inspect a chimney that now vents a gas furnace?

Yes. A lot of Portland chimneys that once served a fireplace now connect to a gas furnace, and the flue still needs to be verified for sizing, liner condition and safe venting.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 473-8720

Brands We Service in Portland

We work with professional-grade product lines, including DuraFlex, HeatShield, Olympia Chimney, Gelco and Copperfield, and we source caps, covers and components through those supply lines rather than retail. Turnaround on material orders is quoted with your estimate. See our brands for the full list and what each is used for.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Chimney Company in Portland, OR

Every price below is a typical estimate for the Portland market. What pushes it up is the condition of the masonry, whether the flue tiles are intact, and whether the damper and crown need replacing. You’ll have a written upfront price before any work starts.

Service Typical range in Portland
Chimney sweep $200 – $325
Standard chimney inspection $150 – $325
Level 2 inspection with camera $200 – $425
Crown repair $200 – $415
Cap installation $250 – $475
Damper replacement $325 – $475
HeatShield flue resurfacing $1,450 – $2,925
DuraFlex liner installation $2,450 – $4,575

On old Portland brick, spalling faces and a cracked crown often drive the repair cost above what a sweep alone would suggest, and relining pushes it higher still. Whatever the number, the written estimate is the price – nothing gets added after the fact.

Want to talk it through?Free estimate, price agreed before work starts
Call (855) 473-8720

Neighborhoods We Serve in Portland

We handle chimney work across Portland, from the older inner neighborhoods where the brick chimneys are to the outer areas. The housing stock differs block to block, and our inspectors look at the age of the chimney and its current use rather than the general area. We answer 24/7, and dispatch runs 7am to 7pm Sunday through Friday.

  • Irvington
  • Alameda
  • Laurelhurst
  • Sullivan’s Gulch
  • Downtown Portland and the 97205 area

Service Area – Cities Near Portland

Portland is one part of a wider service area. Homeowners in Aloha, OR, Hillsboro, OR, Sherwood, OR, and Wilsonville, OR get the same inspection, sweep and repair services from the same chimney specialists. The newer subdivisions in these areas often have different chimney construction than the old Portland stock, and we adjust the inspection to match.

Serving Portland, OR – Our Local Coverage Area

We serve Portland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Portland

Ready to get started? Free estimates in Portland
Call (855) 473-8720

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Portland Customers Say

★★★★★ 4.8 from 11+ reviews

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

- Craig Gallagher

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

- Michelle Tran

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

- Renee Hayes

How It Works in Portland

Getting your chimney cleaning project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Portland. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7