Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Wilsonville
Chimney repair in Wilsonville usually starts with a simple question: what is actually wrong inside that flue? The answer differs block by block here. A 1990s tract-home factory fireplace around Charbonneau and a pre-1970 masonry stack near the Willamette need very different work, and we treat them that way. Our technicians have up to experience, and every repair begins with a camera inspection you can watch with us. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 473-8720 and we will book a sweep or repair visit before the fall crunch.
Why Wilsonville Homeowners Call Chimney Sweep Hillsboro for Chimney Repair
Wilsonville sits in the Willamette Valley’s soft-wood belt. Douglas fir and bigleaf maple drop needles and burn hot and fast, and that changes how a chimney ages here. Glazed, tar-like creosote builds far quicker than most homeowners expect from the hardwood fires they think they’re burning. A flue that looked fine in October can carry a hard glaze by January. That is the single biggest reason we get called out to Wilsonville homes.
The housing split makes it more interesting. Around Old Town and the older river-town core, we regularly meet masonry fireplaces with unlined or clay-tile flues that were never sized for the appliances now venting into them. Out toward Villebois and the subdivisions, it’s mostly factory-built fireplaces and gas inserts venting through chases with caps that have rusted or gone missing. One day of repair here can mean re-crowning a clay-tile stack and re-capping a factory chase on the same street.
We’re a chimney-only specialist, not a generalist contractor. Sweep, inspect, and repair are all handled by the same company from start to finish, so nothing gets handed off. When you want our chimney repair team, you get people whose entire skill set is built around this one system. No subcontracting, no guessing.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Masonry Repair in Wilsonville
Chimney Masonry Repair in Wilsonville most often means addressing mortar and brick that Willamette Valley damp has worked on for years. Cool, wet winters and damp shoulder seasons drive freeze-thaw cycles through mortar joints and crowns, and once water gets in, spalling follows. A typical masonry repair visit covers repointing the joints, rebuilding a crumbling crown, and patching spalled brick faces. If the flue itself is damaged but structurally sound, we’re certified to apply HeatShield resurfacing, which can save you the cost of a full reline. We’ll tell you honestly which one your chimney actually needs.
A typical repointing or tuckpointing job in Wilsonville runs $450 to $900 depending on height and how much of the stack needs work. Crown rebuilding typically lands between $400 and $800. A full reline with a DuraFlex liner system generally runs $2,800 to $5,500. The written estimate sets the final price.
Repointing and Tuckpointing
Mortar is the soft part of a chimney, and it wears first. Repointing rakes out the failed joints and packs in fresh mortar matched to the existing brick. Tuckpointing is the finer version, used where the joints are shallow and you want the repair to disappear into the wall.
Crown Rebuilding
The crown is the concrete cap at the top of the stack, and it takes the most weather. A cracked or flat crown lets water run straight down the flue. We pour a new crown with proper slope so water sheds away from the chimney instead of into it.
Chimney Cap Installation in Wilsonville
Chimney Cap Installation in Wilsonville solves a problem we see constantly: rain and bird nests working their way into a chase that was never meant to stay wet. Factory-built fireplaces around Villebois and the 1980s-2000s subdivisions often have caps that have rusted through or blown off entirely. Damp shoulder seasons give moss and debris plenty of time to accumulate. A correctly sized cap shed water, keeps animals out, and protects the crown and chase below it.
Most cap installs in Wilsonville run $250 to $550, depending on the flue size and whether we’re matching a factory chase or a masonry stack. We source caps and components from Gelco, Famco, and Copperfield, which means professional supply-line parts rather than what’s on the shelf at the hardware store. We carry the right cap for your flue, not a generic one-size fit.
Matching the Cap to the Flue
A cap that’s too small or loosely fitted still lets water and animals in. We size every cap to the actual flue opening, whether that’s a round factory chase or a rectangular masonry stack.
Flashing and Chase Sealing
Failed flashing around the smoke chamber is one of the quiet causes of interior water damage. We reseal flashing and chase joints as part of the cap install so the top of the chimney is watertight, not just covered.
Trusted Brands We Service in Wilsonville
We work with a portfolio of professional-trade brands: DuraFlex for flexible stainless liner systems, HeatShield for flue resurfacing, and Gelco, Olympia Chimney, Famco, and Copperfield for caps, covers, and components. These are supply lines you won’t find at retail. We don’t claim to stock parts locally, but we source the correct component for your flue and get it installed without delay. Fast turnaround matters here because burn-ban season doesn’t wait.
Common Chimney Repair Problems We See in Wilsonville Homes
- Cracked clay-tile flues in the older river-town core. Fast-burning fir creosote heats these tiles hard, and the cracks let heat and moisture reach surrounding framing. Once that happens, the flue needs relining before it’s safe to use again.
- Rusted or missing caps on subdivision factory fireplaces. Around Villebois and the newer subdivisions, missing caps let rain and bird nests rot the chase and crown. It’s a small fix that prevents a much larger repair.
- Deteriorating mortar crowns and failed flashing. Willamette Valley damp works into cracked crowns and flashing, and freeze-thaw cycles accelerate spalling of the brick. Left alone, the damage moves down the stack.
- Appliances vented into flues never sized for them. Older Wilsonville homes often have modern inserts or appliances venting into an original clay-tile flue. The mismatch causes poor draft and heavy creosote buildup.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Wilsonville, OR
Chimney repair pricing in Wilsonville runs across a wide range because the repair scope does. Repointing and tuckpointing typically run $450 to $900. Crown rebuilding lands between $400 and $800. Cap installation generally runs $250 to $550. A full reline with a DuraFlex system runs $2,800 to $5,500, while HeatShield resurfacing, when the flue qualifies, often comes in below a full reline. What drives the cost is height, access, how much of the stack is damaged, and whether the creosote has to be addressed before masonry work begins. Three factors set our price: what the camera shows, the written estimate, and nothing else. Estimates are free.
We Also Serve Cities Near Wilsonville
We work across the surrounding valley, including Canby, Sherwood, Newberg, and Aloha. The same soft-wood creosote and wet-winter masonry wear shows up in all of them, and the same camera-first approach applies. If you’re just outside Wilsonville and want a sweep or repair booked, call and we’ll confirm the details.
Serving Wilsonville, OR – Our Local Coverage Area
We serve Wilsonville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Wilsonville
Most 1990s factory fireplaces in Wilsonville need sweeping, not repair, but the chase and cap are where problems hide. Factory units around Villebois and the subdivisions often have caps that have rusted or blown off, letting rain and bird nests rot the chase and crown. A camera inspection settles it in a few minutes.
Because valley fir burns hotter and faster than hardwood, it lays down glazed stage-three creosote quicker than most homeowners assume. A chimney that looked fine last season can carry a hard, tar-like glaze by January. Sweeping before the burn-ban season, not after, is the fix.
It depends on the camera footage. If the flue is structurally sound but the tiles are cracked or spalled, HeatShield resurfacing can restore it and save you the cost of a full reline. If the structure is compromised, we recommend a DuraFlex stainless liner. Nothing is recommended without camera evidence you can see.
Ask to see the camera footage and the specific defect it shows. A qualified local pro runs a Level 2 inspection with a camera, shows the homeowner the footage, and only then recommends the fix. If a quote doesn’t come with video evidence you can review, ask for it. That’s the standard we hold ourselves to.
Before. Cap and crown repairs protect the stack from the wet shoulder seasons when moss, debris, and bird nests accumulate, and damage left through fall gets worse through winter freeze-thaw. Getting it done in late summer means the chimney is dry and ready for the first cold snap.
When a Chimney Repair Can Safely Wait
Not every problem we find needs fixing this month, and we say so plainly. A hairline crack in a crown that still sheds water, a cap that’s intact but weathered, or mortar joints with minor surface wear can often be documented and watched. The camera footage is yours to review. Where a repair cannot wait is when heat or moisture can reach framing, when a flue is cracked, or when creosote has glazed to the point of ignition risk. Those are safety matters, not upsells, and we’ll tell you which category your chimney falls into.
What Happens When You Call
Call (855) 473-8720. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. We start with a Level 2 inspection with camera footage you can watch, then give you a written estimate before any work begins. Estimates are free, and the price is per job by that written estimate. Whether it’s repointing near Old Town or re-capping a factory chase around Charbonneau, you’ll know exactly what your Wilsonville chimney needs before anyone touches it.
Written by the team at Chimney Sweep Hillsboro.