Chimney Repair in Portland, OR | Chimney Sweep Hillsboro

Chimney Repair in Portland - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Portland

Chimney repair in Portland usually comes down to one thing: water getting into old masonry. Our technicians have up to experience working on exactly the kind of chimneys you’ll find across this city, and we know the housing stock here well enough to tell a cosmetic crack from a real structural problem. We handle sweeping, inspection, and repair under one company, so there’s no handoff to a third party once the work starts. Call (855) 473-8720 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.

Call (855) 473-8720

Why Portland Homeowners Call Chimney Sweep Hillsboro for Chimney Repair

Portland homeowners call us because the repair recommendation they get is tied to something they can see. Every assessment starts with a camera scan of the flue, smoke chamber, and the exterior masonry, and you see the footage before anyone quotes a number. That matters in a city where relining and rebuild work gets sold hard and the evidence is easy to skip.

Our reputation here is built on the same three services done in-house: sweep, inspect, repair, handled by the same specialist from start to finish. We work with professional-grade product lines like HeatShield, DuraFlex, and Gelco, which means the materials going into your chimney are trade-grade, not what’s on the shelf at the hardware store. Portland customers tell us they appreciate being told plainly when work can wait, and when it genuinely can’t.

For Portland in particular, we’ve worked in the older neighborhoods long enough to know that the call is often about masonry and venting rather than creosote. A flashlight on the crown and flashing tells you more than a brush does in most of these homes. That focus shapes how we approach every job.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Flashing Repair in Portland

Chimney Flashing Repair in Portland is one of the most common jobs we handle, because flashing at the roof line is where water first gets in. Where the chimney meets the roof on a Craftsman or Tudor bungalow, the original metal flashing has often been sealed over and re-sealed for decades. When it fails, water tracks down into the firebox, rusts the damper, and rots framing near the chimney chase without showing much on the surface. Typical flashing repair in Portland runs $350 – $750 depending on roof pitch, access, and how much counter-flashing has to be rebuilt. We’ll show you the separation with a camera or on the roof before quoting anything.

What a Flashing Job Involves

Proper flashing repair means removing the failed sealant, cutting back to sound roofing, and installing new step flashing woven into the shingles with a counter-flashing set into the masonry. Sealant alone is a short-term patch. The goal is a mechanical water path that sheds rain away from the chimney, not just a bead of caulk.

When to Call About Flashing

Signs to watch for include staining on the chimney chase below the roof line, water in the firebox after a rain, and rust on the damper frame. If you see any of these after a wet winter, get it looked at before the next rainy season. Waiting rarely makes it cheaper.

Chimney Crown Repair in Portland

Chimney Crown Repair in Portland is the other job that shows up on nearly every older brick chimney, since the concrete crown takes the blunt of the weather and cracks over time. On 1900s – 1920s chimneys, the crown often has moss growing in the cracks, and once water gets through, it soaks down into the brick and the flue tiles. A crown repair in Portland typically runs $400 – $900, depending on size, whether it can be resurfaced or needs a full pour, and how much of the top course of brick has to be reset first. We’ll photograph the crown and show you the cracks before recommending anything.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 473-8720

Crown Repair vs. Full Rebuild

A cracked or spalled crown can often be repaired with a proper mortar mix and a flexible sealant, or resurfaced. A full rebuild of the top section only makes sense when the brick underneath is also failing. The camera and the photos settle which is which.

Resurfacing an Aging Masonry Top

When the crown is sound but the mortar joints are crumbling, resurfacing can extend its life without tearing it off. That work gets done with professional masonry materials matched to the existing brick, not a premixed bag from the hardware store. The finish matters as much as the repair.

Trusted Brands We Service in Portland

We install and work with DuraFlex flexible liner systems, HeatShield for flue resurfacing, and Gelco and Olympia Chimney components for caps, covers, and venting. These are professional-trade product lines, which is why the fit and the materials hold up differently than retail-grade parts. We don’t stock parts on a truck, so turnaround depends on getting the right component to your job, and we’ll give you a real timeline on the estimate rather than a guess. If a repair calls for a specific brand to match your existing setup, we’ll say so upfront. You’ll know exactly what’s being installed and why.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (855) 473-8720

Common Chimney Repair Problems We See in Portland Homes

The work here is shaped by the climate and the age of the housing. Portland’s long, wet winters and mild temperatures don’t create the hard-freeze creosote cycles of colder regions, but they soak aging brick and drive most of the damage we repair.

  • Water-soaked brick and spalling faces. On 1910s – 1920s Craftsman chimneys, rain saturates the exterior brick and the face flakes off. That’s the dominant repair driver in this city, not heavy creosote.
  • Mossy, cracked chimney crowns. A cracked crown lets water into the top of the stack, and moss spreads in the joints. Once it’s in, the flue tiles soak from above as well as from weather.
  • Original clay-tile flues venting new appliances. Many inner Portland chimneys were built for open wood fireplaces but now vent a gas furnace or wood insert. That mismatch causes draft problems and needs a proper inspection and often a liner.
  • Rusted dampers and failing flashing at the roof line. Water that gets past the flashing tracks into the smoke chamber and rusts the damper frame. This gets upsold as a full rebuild, but a camera scan shows what actually needs repair.

Pricing for Chimney Repair in Portland, OR

Chimney repair pricing in Portland follows the scope of work, and we’d rather give you a real range than a vague answer. A typical crown repair runs $400 – $900. Flashing repair typically runs $350 – $750. Mortar repointing and tuckpointing on a masonry chimney usually runs $25 – $50 per square foot of joint work, which adds up fast on a tall external chimney. If resurfacing an aging flue, HeatShield is often the lower-cost alternative to a full reline. Chimney waterproofing on exterior brick typically runs $300 – $700, depending on surface area and access. A full reline with a DuraFlex system runs higher and gets quoted only after camera evidence shows it’s actually needed. The written estimate sets the final price, and nothing is recommended without footage you can see for yourself. Call (855) 473-8720 for a free estimate.

We Also Serve Cities Near Portland

Our chimney repair team covers the surrounding communities as well, including Aloha, Hillsboro, Sherwood, and Wilsonville. The housing stock changes a bit as you move out from Portland, but the water-driven masonry problems and venting issues are the same. If you’re just outside the city line, call and we’ll confirm coverage and timing. You can also read more about our chimney repair services before booking.

Serving Portland, OR – Our Local Coverage Area

We serve Portland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Portland

Why Portland Chooses Chimney Sweep Hillsboro

We set the standard for chimney repair in Portland.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Portland

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Portland Customers Say

Trusted by homeowners across Portland and surrounding areas.

★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Craig Gallagher
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Michelle Tran
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Renee Hayes

Ready for Chimney Repair in Portland?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Portland.

(855) 473-8720

Request a Free Estimate in Portland

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7