Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Portland, OR
Chimney inspection in Portland starts with a simple reality: the chimney on your house was probably built for wood heat a century ago, and it’s been asked to do a different job ever since. In the Craftsman and foursquare neighborhoods of inner Portland, clay-tile flues that once carried smoke from a fireplace now vent a gas furnace or a wood insert, and the masonry around them has spent a hundred damp winters soaking up rain. That combination – old brick, original flues, a changed heat source – is what our inspectors look at first. Call (855) 473-8720 to book an inspection.
Why Portland Homes Are Different
Portland’s long, wet winters are the dominant force on chimney masonry here. The city sees roughly 36 inches of rain a year, and very little of it arrives as a hard freeze. That matters: instead of the freeze-thaw creosote cycles you get in colder mountain towns, the slow, steady moisture is what does the damage. Brick absorbs water, the faces spall and flake off, crowns crack, dampers rust shut, and moss takes hold in the mortar joints.
The housing stock amplifies it. Inner Portland – Irvington, Alameda, Laurelhurst, Sullivan’s Gulch, the 97212 and 97232 ZIPs – is full of 1900s to 1920s Craftsman and Tudor bungalows with tall external brick chimneys. Those chimneys are beautiful and they are also water magnets. Most now serve gas furnaces and wood inserts rather than open fireplaces, which changes what the flue needs to handle and how often it needs a sweep. A 97205 homeowner and a Sullivan’s Gulch homeowner may have identical chimneys and completely different venting demands. That’s why an inspection comes before any recommendation.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Portland Services
Two things bring Portland homeowners to the phone more than anything else: the once-a-year sweep and the repair that follows a wet winter. Both are handled by the same chimney specialists, start to finish.
Chimney Sweep in Portland
A sweep here is rarely just a sweep. On a Portland chimney that vents a wood insert, we’re removing creosote and soot from the flue, but we’re also checking whether the rain has been getting in and whether the damper still seals. When a chimney now serves a gas furnace, there’s far less creosote and more attention to the flue liner and the cap. Either way the flue gets brushed top to bottom, the firebox and smoke chamber get cleaned, and the debris leaves the house with us. If you’re overdue, book a chimney sweep and we’ll tell you what the flue actually needs.

Chimney Repair in Portland
Portland repair calls usually land on masonry rather than flue internals. After a wet winter, the exterior brick on a 1910s chimney often shows spalling faces and a crown that’s cracked enough to let water straight down into the structure. We handle crown repair, waterproofing, cap and damper work, and relining when the flue tiles are shot. Because we carry HeatShield resurfacing, a structurally sound flue with damaged tiles can sometimes be restored without a full reline. When tear-out is the honest answer, we install DuraFlex. Start with chimney repair.

Chimney Inspection in Portland
Chimney Inspection in Portland is the service that answers the questions a sweep can’t. On a 1900s to 1920s Craftsman with an original brick chimney, we need to know whether the flue tiles are cracked, whether water has been getting into the masonry, and whether the appliance now hooked to that flue is venting safely. The wet climate makes this more urgent than the age alone suggests: a chimney that looks fine from the curb can be holding moisture deep in the brick. A standalone Chimney Inspection gives you an honest assessment before you commit to any repair.
Chimney Flue Inspection
The flue is the inside of the chimney, and it’s the part you can’t see without a camera. This is where we spend most of an inspection on a Portland home, because the flue has usually outlived its original purpose.
Signs you need it
You’ve smelled a faint smoky or musty odor in the house during damp weather, or the chimney now serves a furnace or insert and nobody has verified the flue since it changed over.
What it costs in Portland
A chimney flue inspection in Portland typically falls within our standard inspection range, with camera work priced by the written estimate before we begin.
How we do it
We run a camera down the flue, check the tiles for cracks and gaps, confirm the liner is sized correctly for the appliance, and record what we find in a photo report you keep.
Level 2 Chimney Inspection
A Level 2 inspection goes beyond the visible flue. It includes the accessible attic and crawl space, the chimney exterior, and the connections between the appliance and the chimney – which is what most 1910s Portland homes need before any repair decision.
Signs you need it
You’ve just bought the house and the chimney history is unknown, or you’ve changed appliances from an open fireplace to an insert or furnace.
What it costs in Portland
A Level 2 inspection in Portland is typically quoted at the higher end of our inspection range, and the written estimate sets the final price.
How we do it
We inspect the accessible portions of the chimney interior and exterior, the attic and crawl space, document clearances, and give you a photo report of every defect found.
What Chimney Inspection Costs in Portland
Inspection pricing depends on how far we go and how much of the chimney is accessible. The written estimate always comes before the work.
| Item | Typical range in Portland |
|---|---|
| Standard chimney inspection | $150 – $325 |
| Level 2 inspection with camera | $200 – $425 |
| Photo report (included with inspection) | No added cost |
Do I need a chimney inspection if I only burn occasionally?
Yes. Portland’s damp climate means water damage and cracked flue tiles can develop whether or not you’ve been burning, and an inspection is how you find out before a small crack turns into a reline.
Can you inspect a chimney that now vents a gas furnace?
Yes. A lot of Portland chimneys that once served a fireplace now connect to a gas furnace, and the flue still needs to be verified for sizing, liner condition and safe venting.
Brands We Service in Portland
We work with professional-grade product lines, including DuraFlex, HeatShield, Olympia Chimney, Gelco and Copperfield, and we source caps, covers and components through those supply lines rather than retail. Turnaround on material orders is quoted with your estimate. See our brands for the full list and what each is used for.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Portland, OR
Every price below is a typical estimate for the Portland market. What pushes it up is the condition of the masonry, whether the flue tiles are intact, and whether the damper and crown need replacing. You’ll have a written upfront price before any work starts.
| Service | Typical range in Portland |
|---|---|
| Chimney sweep | $200 – $325 |
| Standard chimney inspection | $150 – $325 |
| Level 2 inspection with camera | $200 – $425 |
| Crown repair | $200 – $415 |
| Cap installation | $250 – $475 |
| Damper replacement | $325 – $475 |
| HeatShield flue resurfacing | $1,450 – $2,925 |
| DuraFlex liner installation | $2,450 – $4,575 |
On old Portland brick, spalling faces and a cracked crown often drive the repair cost above what a sweep alone would suggest, and relining pushes it higher still. Whatever the number, the written estimate is the price – nothing gets added after the fact.
Neighborhoods We Serve in Portland
We handle chimney work across Portland, from the older inner neighborhoods where the brick chimneys are to the outer areas. The housing stock differs block to block, and our inspectors look at the age of the chimney and its current use rather than the general area. We answer 24/7, and dispatch runs 7am to 7pm Sunday through Friday.
- Irvington
- Alameda
- Laurelhurst
- Sullivan’s Gulch
- Downtown Portland and the 97205 area
Service Area – Cities Near Portland
Portland is one part of a wider service area. Homeowners in Aloha, OR, Hillsboro, OR, Sherwood, OR, and Wilsonville, OR get the same inspection, sweep and repair services from the same chimney specialists. The newer subdivisions in these areas often have different chimney construction than the old Portland stock, and we adjust the inspection to match.
Serving Portland, OR – Our Local Coverage Area
We serve Portland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Portland
Yes. We cover Portland in full, including the outer neighborhoods and the 97210 and 97213 ZIPs, and the inspection is adjusted for the chimney’s age and construction rather than assumed from the address.
A straight cap installation or damper replacement usually doesn’t require one, but a reline or masonry repair can. We’ll tell you what your repair typically needs so you can confirm with the city before work starts.
Call (855) 473-8720. We answer 24/7, and dispatch runs 7am to 7pm Sunday through Friday. We’ll book your inspection into the first available opening and confirm before we come.
If it’s just carbon buildup, creosote can ignite. In Portland’s wet climate, more often the risk is water quietly rotting the masonry and flue tiles, which is far cheaper to catch early than after a reline is needed.
A standard inspection typically runs $150 to $325, and a Level 2 with camera work lands around $200 to $425. Call (855) 473-8720 for an exact quote – estimates are free.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Portland Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Craig Gallagher"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Michelle Tran"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Renee Hayes