G

Gelco Chimney Cleaning Service in Hillsboro, OR

Gas fireplace serviceGas fireplace service
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Why Hillsboro Homeowners Choose Gelco Chimney Cleaning

We provide independent Gelco chimney cleaning, repair and installation service in Hillsboro, OR. That means we work on Gelco caps, dampers and liner kits every week, without any manufacturer affiliation, and we tell you plainly whether your unit needs a re-gasket and adjustment or a full replacement. Gelco hardware shows up on a lot of Hillsboro-area homes, and the hands-on familiarity our technicians have built with it is what makes the diagnosis reliable.

Call (855) 473-8720

Gelco is a chimney cap. The caps, top-sealing dampers and flexible liner kits that carry the name are built to last, but they sit on a roof in a wet climate and they take abuse from weather, wildlife and creosote. Recognizing the specific ways they age is a different skill from sweeping a flue. That’s the work we do here.

We’re an independent Gelco service provider. We’re not authorized by Gelco, not a dealer and not affiliated with the manufacturer. Our technicians have up to 11 years of experience, and they work only on chimney systems. Call (855) 473-8720. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Trust Chimney Sweep Hillsboro for Your Gelco Chimney Cleaning?

A cap is a small piece of metal on top of a house, and most of what goes wrong with one happens out of sight. Our technicians have spent their working hours on roofs, not on general contracting, so they know what a Gelco multi-flue cap looks like when its screens are half packed with fir needles, and what a top-sealing damper feels like when its cable linkage is binding but hasn’t failed yet.

We service Gelco equipment with quality parts that fit it. That distinction matters on a cap: the mounting pattern and flue dimensions have to match the original, or you end up redrilling a crown that was fine before anyone touched it. Matching hardware keeps the fit tight and the crown intact.

Warranty-safe practice guides everything we do. We don’t modify a unit in ways that would void coverage, and we don’t talk you into a replacement when a reseal and adjustment will do the job. When a Gelco liner or cap does need to come off, we explain why before we start. You’ll hear the reasoning, not just the price.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common Gelco Chimney Cleaning Problems We Fix in Hillsboro

Hillsboro’s wet winters and the fir and alder many households burn off East Main Street put specific stress on Gelco hardware. Here’s what we run into most.

  • Multi-flue cap screens packed with fir needles and bird nesting. Fir needles are short, and they wedge into screen mesh in a way longer debris doesn’t. Once the screens load up, draft drops and rain-driven water can pool on the crown instead of draining away. It’s a slow problem that shows up as a smoky fireplace months later.
  • Cap legs and mounting tabs loosening at the screw points. Stainless holds up well, but the fasteners that anchor a cap take wind load all winter. When a leg corrodes or a screw backs out, the cap starts to rattle in a gust or lift slightly off the flue. A lifting cap isn’t just noisy – it lets water and animals in.
  • Top-sealing damper gaskets hardening and cable linkages binding. The gasket is what makes the seal, and cold, damp air for months on end hardens it. The cable that pulls the damper open can bind at the same time. The result is a damper that sits partly open and bleeds heat all winter, or one that sticks shut and rolls smoke into the room when you light a fire.
  • Flexible liner couplings working loose. A liner kit is only as good as its connections. When a coupling loosens at the appliance collar or the top plate, creosote can seep past the joint and draft suffers. It’s a quiet failure – nothing looks wrong from the hearth.
  • Caps sitting crooked after a windstorm. Freezing rain and high wind are part of a Hillsboro winter. A cap knocked off square still looks attached from the ground, but a tilted cap channels water the wrong way and can leave a gap at the flue edge.
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 473-8720

Gelco Parts & Our Repair-vs-Replace Approach

Our parts decision starts with fit, not price. For Gelco caps and dampers, matching the original mounting pattern and flue dimensions with OEM-equivalent components avoids redrilling crowns and keeps the seal tight. On liner kits, quality aftermarket stainless is often fine where the appliance collar and top plate are compatible. We don’t claim to stock genuine Gelco parts, and we won’t pretend a generic cap is the same casting as the one that came off your roof.

Repair beats replacement when the crown, flue tile and firebox are sound. A hardened gasket and a binding linkage are a service job, not a rebuild. A full replacement is only warranted once we’ve confirmed spalling masonry or cracked flue tile with a camera, and we show you the footage so you’re judging the evidence, not our word.

If your Gelco cap is rattling or your damper won’t seat, call (855) 473-8720 for a free estimate. We’ll tell you honestly which path your chimney actually needs.

Our Gelco Service Process – Step by Step

  1. 1
    Diagnosis. We inspect from the roof and from the firebox. On the roof that means checking cap screens, mounting tabs and the crown. Inside, we test the damper’s full travel and look for smoke staining that points to rollback.
  2. 2
    Repair or install. A gasket gets replaced and the linkage adjusted. A cap gets reseated on matching hardware. A liner coupling gets tightened or re-terminated. If the unit is past saving, we size the replacement to the flue and the appliance.
  3. 3
    Test. We run the damper through its range by hand and confirm it seals. We check draft and watch for water paths across the crown before we close up.
  4. 4
    Warranty and record. We note what was done, which parts went on, and when the next inspection is due, so your coverage stays intact and the next technician isn’t guessing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (855) 473-8720

Gelco Products We Service & Install in Hillsboro

We work on the Gelco products that live on Hillsboro roofs and in Hillsboro fireplaces: multi-flue stainless chimney cap assemblies, single-flue chase-style caps, stainless flexible flue liner kits, and top-sealing damper units. Each one ages differently, and each one has a repair path that’s cheaper than replacement when it’s caught early.

Multi-flue caps need screen clearing and hardware checks. Chase-style caps need a good look at the seal where they meet the chase top. Liner kits need their couplings verified at both ends. Top-sealing dampers need a gasket and linkage inspection. If you’re not sure which one you have, we’ll identify it on the roof and tell you what condition it’s in.

We Also Service These Brands

Gelco isn’t the only name we know, and we’re not tied to a single product line. We work with DuraFlex flexible liner systems for new installs and replacements, and we’re certified to apply HeatShield chimney resurfacing, which can save a structurally sound but damaged flue from a full reline. Multi-brand capability means the recommendation fits your chimney, not a brand.

FAQs – Gelco Chimney Cleaning Service in Hillsboro

Book Your Gelco Service in Hillsboro, OR

If your Gelco cap is letting water in, your top-sealing damper is sticking, or you just want a specialist to look at the whole system before winter, call (855) 473-8720. We’ll book a sweep or an inspection, show you what we find, and tell you honestly whether it’s a repair or a replacement. Call (855) 473-8720. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Chimney Sweep Hillsboro.

Need Chimney Cleaning help nationwide? Licensed & insured · free written estimates
Call (855) 473-8720
Local Service Coverage

Request a Free Estimate in Hillsboro

Tell us what you need - Chimney Sweep Hillsboro responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7