Chimney Liner & Rebuild Cost in Hillsboro - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 473-8720

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
How Much Does Chimney Liner & Rebuild Cost in Hillsboro, OR? (2026 Price Guide) | Chimney Sweep Hillsboro
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 473-8720

How Much Does Chimney Liner & Rebuild Cost in Hillsboro, OR?

Chimney liner and rebuild work in Hillsboro typically runs $1,900 to $6,800, with most single-flue liner replacements landing near $3,200 and a partial chimney rebuild near $4,500. HeatShield resurfacing, which restores damaged flue tiles instead of replacing the liner, usually costs $1,100 to $2,400. The exact figure depends on flue size, liner material, and how much masonry has to come down and go back up, so the written estimate after an inspection is what sets your final price.

We’re a chimney specialist, not a general contractor who adds fireplaces to the list. Sweep, inspect, repair: all handled by the same people, start to finish, with professional materials the hardware store shelf doesn’t carry. Our technicians have up to experience, and we answer 24/7 at (855) 473-8720.

Key Takeaways

  • Full stainless liner replacement in Hillsboro: roughly $1,900 to $4,600, depending on flue height and material grade.
  • HeatShield resurfacing can cost $1,100 to $2,400 and often replaces a full reline when the flue structure is sound.
  • Partial chimney rebuilds (crown, top courses, flashing): $2,400 to $6,800.
  • The written estimate always sets the final price, and estimates are free.
  • An inspection isn’t an upsell. It’s how we determine what your flue actually needs.

Chimney Liner & Rebuild Cost Breakdown (2026)

Here’s how the numbers shake out for a typical Hillsboro home with a single wood-burning or gas flue. Ranges are typical for this market in 2026, not fixed quotes.

Line Item Typical Cost Range What It Covers
Inspection (Level 1 or 2) $150 – $450 Camera scan, flue condition, cap and crown check
HeatShield flue resurfacing $1,100 – $2,400 Restores cracked or spalled tiles when structure is intact
Stainless flexible liner install (single flue) $1,900 – $4,600 DuraFlex liner, insulation, cap, and top plate
Liner replacement (existing failed liner removed) $2,200 – $4,900 Removal, re-measure, new liner, fittings
Crown rebuild $450 – $1,100 New crown to shed water off the chimney top
Partial chimney rebuild (top courses) $2,400 – $6,800 Masonry rebuild of upper section, flashing, cap reset
Chimney cap and components $180 – $650 Stainless or copper cap, screens, top-sealing damper parts
Flue components (thimble, connector, adapter) $75 – $400 Gelco, Famco, Olympia Chimney, and Copperfield pieces

What pushes a job toward the high end? A taller chimney means more liner, more insulation, and more labor. A flue that’s been relined once before (common in older Hillsboro homes that changed fuel type) means the old liner has to come out first. A masonry chimney with a failed crown and cracked top courses means you’re paying for rebuild work on top of the liner. A gas appliance usually needs a different liner spec than a wood-burning stove, and the wrong one is a safety issue, not a shortcut. That’s why we inspect before we quote.

What pulls it down? When the flue tiles are cracked but the chimney structure is still sound, HeatShield resurfacing can save you the cost of a full reline. We’ll tell you honestly which one you actually need. A standalone inspection is a real service here, not a sales funnel: you can get an assessment and think it over before committing to anything.

Want to talk it through?Free estimate, price agreed before work starts
Call (855) 473-8720

What Affects Chimney Liner & Rebuild Pricing in Hillsboro

  • Chimney height and flue count. A one-story ranch in a Hillsboro neighborhood like Jackson Bottom or downtown needs less liner footage than a taller two-story, and every extra flue adds its own liner run. Height and count are the two biggest multipliers on any liner quote.
  • Liner material and grade. Standard stainless flex is the workhorse. Higher-grade alloy for wood-burning with heavy use or for certain gas appliances costs more but lasts longer under the same heat cycling. We carry DuraFlex flexible liner systems for new installs and replacements and match the alloy to your fuel type.
  • Whether resurfacing will do. HeatShield resurfacing works when the flue structure is intact and the damage is at the tile surface. If tiles are missing or the structure has shifted, resurfacing won’t hold and a full reline is the correct call. Getting this wrong in either direction is expensive.
  • Masonry condition. Hillsboro’s wet winters work on brick and mortar joints year after year. A crown that no longer sheds water, spalled brick at the top, and failed flashing all feed into rebuild cost rather than liner cost, and the two often need to be handled together.
  • Access and roof pitch. Steep pitches and tight side-yard access mean more setup and safety work. That’s a labor cost, not a materials cost, and it varies block to block.
  • Liner removal. If there’s an old failed liner in the flue, it comes out before the new one goes in. That’s a separate line on the quote and one homeowners often don’t anticipate.

If you’re in the middle of buying a house and the inspection report flags the chimney, our Hillsboro service page covers how a standalone inspection fits into that process. And if you just need the flue cleaned before anyone quotes repair work, start with chimney sweep hillsboro.

How to Save on Chimney Liner & Rebuild

The biggest lever is getting the right repair the first time. A cheap reline you didn’t need is money gone. A patch that fails next winter costs you the patch plus the reline. Here’s what actually moves the number down:

  • Ask whether resurfacing will do. When the flue structure is sound, HeatShield resurfacing often costs a fraction of a full reline. We’re certified to apply it, and we’ll say so plainly if it’s not the right fit for your flue.
  • Fix the crown before the water gets in. A cracked crown is one of the cheapest things to address and one of the most expensive to ignore. Water gets behind brick, freezes, and turns a small repair into a rebuild.
  • Bundle the liner and the top work. If a cap or crown needs attention anyway, having it done alongside a liner install saves the second trip and the second setup.
  • Get an honest assessment first. An inspection tells you what the flue actually needs. It’s a standalone service, so you’re not obligated to book repair work the same day.
  • Know your fuel type. Tell us whether it’s wood-burning, gas, or a pellet appliance up front. The right liner spec for your fuel is a cost saving over the long run and a safety requirement regardless.

Estimates are free, and the written estimate sets the final price. Call (855) 473-8720. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 473-8720

Is It Cheaper to Repair or Replace a Chimney Liner in Hillsboro?

Repair is cheaper when it’s the right repair: HeatShield resurfacing at roughly $1,100 to $2,400 is usually less than half the cost of a full stainless reline at $1,900 to $4,600. Replacement is the better call when flue tiles are missing, the structure has shifted, or an old liner has already failed. The deciding factor is the condition of the flue behind the damage, which is what a camera inspection tells us. Call (855) 473-8720 for an exact quote; estimates are free.

FAQs – Chimney Liner & Rebuild Cost

How much does a chimney liner cost in Hillsboro?

A stainless flexible liner for a single flue in Hillsboro typically costs $1,900 to $4,600 installed, including insulation, cap, and top plate. The range depends on chimney height, liner alloy, fuel type, and whether an old liner has to be removed first. Call (855) 473-8720 for an exact quote; estimates are free.

Do I need a full reline or will HeatShield resurfacing work?

HeatShield resurfacing works when the flue structure is intact and the damage is at the tile surface, and it typically runs $1,100 to $2,400 versus $1,900 to $4,600 for a full reline. If tiles are missing or the structure has shifted, a full reline is the correct call. We’re certified to apply HeatShield and we’ll tell you honestly which one your flue actually needs. Call (855) 473-8720 for an exact quote; estimates are free.

How much does a chimney rebuild cost in Hillsboro?

A partial chimney rebuild, covering the crown and top courses, typically runs $2,400 to $6,800 in Hillsboro. A crown rebuild alone is usually $450 to $1,100. The wide range comes down to how many courses of brick come off, whether flashing gets reset, and access. Call (855) 473-8720 for an exact quote; estimates are free.

Can you install a liner the same day?

Single-flue liner installs are often completed in one day, but same-day scheduling depends on what the inspection finds and whether an old liner needs removal first. Call (855) 473-8720. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Will a damaged liner raise my heating bill?

A failed liner or cracked flue tiles let heat escape up the chimney and let cold air in, and they also let combustion byproducts into the house. Fixing the liner restores the flue’s job as a sealed exhaust path. A damaged flue is first a safety issue, then an efficiency one. Call (855) 473-8720 for an exact quote; estimates are free.

Do you use the same materials a hardware store sells?

No. We carry DuraFlex liner systems and install HeatShield resurfacing, and we source caps, covers, and components from Gelco, Famco, Olympia Chimney, and Copperfield. Those are professional chimney supply lines, not what’s on the shelf at the big-box store. Call (855) 473-8720 for an exact quote; estimates are free.

What to Check Before You Commit to a Quote

Ask any contractor three things. What did the camera show? Which liner alloy and grade are you specifying, and why that one for my fuel type? And is the crown, cap, and flashing condition part of this quote or a separate job? A quote that skips those answers is a quote you’ll be renegotiating later.

We work with a portfolio of professional-trade brands: DuraFlex for flexible liner systems, HeatShield for resurfacing, and Gelco, Olympia Chimney, Famco, and Copperfield for caps, covers, and components. That sourcing matters because the parts that fail first are usually the cheap ones. If you’re weighing repair against replacement, a chimney inspection is the step that settles it.

Same-day service is often available when the schedule allows. If a door, flue, or appliance has failed and smoke is backing up, we’d rather hear about it early. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.

Safety note: any work inside a flue, at the top of a chimney, or on a steep roof carries real risk from height, heat, and combustion byproducts. This isn’t a job for a ladder and a weekend. It belongs with a trained chimney professional who has the right equipment and knows what a proper spec looks like.

Call (855) 473-8720. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and the written estimate sets the final price.

Pricing reflects the Hillsboro market as of 2026. Chimney Sweep Hillsboro offers free estimates – call (855) 473-8720.

Written by the team at Chimney Sweep Hillsboro.

What Our Customers Say

★★★★★ 4.8 from 11+ reviews

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

- Craig Gallagher

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

- Michelle Tran

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

- Renee Hayes
Need Chimney Cleaning help in Hillsboro? Licensed & insured · free written estimates
Call (855) 473-8720

Request a Free Estimate

Tell us what's going on in Hillsboro. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7