Chimney Repair in Hillsboro, OR | Chimney Sweep Hillsboro

Chimney Repair in Hillsboro - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Hillsboro

Chimney repair in Hillsboro isn’t only about old brick. A large share of the homes we look at in this town have factory-built fireplaces, gas inserts and prefabricated chases, and those systems need repair too – just a different kind. We know the difference between a 1920s clay-tile flue near the historic downtown core and a short metal vent run in a newer subdivision, and we work on both. Our technicians have up to experience, and sweep, inspect and repair are all handled by the same specialist, start to finish. Call (855) 473-8720 to book a free estimate.

Call (855) 473-8720

Why Hillsboro Homeowners Call Chimney Sweep Hillsboro for Chimney Repair

We’re a chimney specialist, not a general handyman outfit. Every technician’s skill set is built entirely around this one system, which is why we can tell you whether your flue needs a resurfaced liner, a new cap, or nothing at all. That matters in a market like Hillsboro, where the housing stock swings from early-1900s Craftsman bungalows to tract homes finished in the last few years.

Our inspection service is a standalone offering, not a sales gimmick. You can book an honest assessment before you commit to any repair, and we’ll tell you plainly when work can wait. We carry the professional materials rather than what’s on the shelf at the hardware store, because fitting a generic cap to a brand-specific unit is how small water problems start.

We serve homeowners across Hillsboro, including the older blocks off East Main Street, the South Hillsboro and Reed’s Crossing subdivisions, and the neighborhoods around downtown. If you’ve noticed odor, smoke backdraft or a stain on the firebox, that’s the point to call. We answer 24/7, with fast dispatch from 7am to 7pm.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Installation in Hillsboro

Chimney Cap Installation in Hillsboro often means matching a cap to a specific manufacturer’s unit rather than cutting one to fit. On a factory-built fireplace, the cap has to align with the vent dimensions and the brand of the chase, or you’re just capping a problem. A typical cap installation in Hillsboro runs about $250 to $550, depending on the unit and the components required.

What the job involves

We identify the fireplace or insert and its brand first, then select a correct-fit cap from professional supply lines such as Gelco or Copperfield. The cap is seated and secured against the chase so wind can’t lift it, and we check the damper and firebox for moisture staining while we’re up there.

When a Hillsboro homeowner needs one

If a fireplace has run without a cap through a few wet winters, or animals have found their way into a short vent run, it’s time. Our region’s windstorms can also work a loose top free over a season. Call (855) 473-8720 and we’ll take a look.

Chimney Cap Replacement in Hillsboro

Chimney Cap Replacement in Hillsboro usually comes up after a windstorm has peeled a thin-gauge OEM-style cap off a prefabricated chase, or when an original cap has rusted through. Replacement in Hillsboro typically runs $275 to $600, with the written estimate setting the final price.

Why the original cap failed

Many tract-home units went in with a lightweight cap that survives a few seasons and then lifts, cracks or corrodes. Once it’s gone, rain gets straight into the vent run. A correct-fit replacement, sourced from a professional line like Famco or Olympia Chimney, closes that gap properly.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (855) 473-8720

What we check before refitting

We don’t just swap the lid. We inspect the chase top and flashing for movement, confirm the vent dimensions match the replacement, and check that no nesting material has dropped into the flue. Nothing gets recommended without evidence you can see.

Trusted Brands We Service in Hillsboro

We work with a portfolio of professional-trade brands, including Gelco, Olympia Chimney and Copperfield, alongside DuraFlex liner systems and HeatShield resurfacing. These are the supply lines a specialist uses, not retail-grade substitutes. We don’t claim to stock parts for every unit, and we won’t pretend otherwise – but because chimney work is all we do, we know where to source a correct-fit cap or chase component and get it fitted without a runaround. HeatShield capability matters here too: a damaged but structurally sound flue tile can often be resurfaced instead of fully relined, and we’ll tell you honestly which one your chimney actually needs.

Common Chimney Repair Problems We See in Hillsboro Homes

  • Factory-built fireplaces fitted with generic caps. Contractors treat a metal fireplace like masonry and fit a cap that doesn’t match the brand or vent dimensions. Rain and downdrafts find their way back in, and the leak looks mysterious until the cap is matched properly.
  • Loose prefabricated chase tops and failed flashing. Because a fireplace is only a few years old, many homeowners skip inspection. Hillsboro’s cool, wet winters then work on a loose chase cover or flashing until water reaches the firebox and damper.
  • Windstorm damage and animal nesting. Short factory-built vent runs are easy for animals to enter once a cap lifts. Without a Level 1 or Level 2 inspection, the blockage only shows up when the fireplace smokes or draft fails.
  • Deteriorated clay-tile liners near downtown. The older masonry chimneys off East Main Street often have original clay tile that’s cracked or unlined. Locally sourced fir and alder also builds stickier creosote than hardwood fires, so annual sweeping matters here.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (855) 473-8720

Pricing for Chimney Repair in Hillsboro, OR

Chimney repair in Hillsboro runs from a few hundred dollars for a cap replacement up to several thousand for a rebuild, and the range is wide because the systems are so different. Here are the typical estimated ranges we quote in this market:

  • Chimney cap installation: $250 to $550
  • Chimney cap replacement: $275 to $600
  • Mortar repointing and tuckpointing: $450 to $1,200
  • Chimney waterproofing: $400 to $900
  • Flashing repair: $350 to $800
  • Spalling brick repair: $500 to $1,500
  • Chimney rebuilding: $2,500 to $7,000

What drives the number is the material and the access, not the size of the town. A correct-fit cap from a professional line costs more than a generic one, and a prefabricated chase component differs in price from a masonry crown. Every estimate is free and written down, and nothing is recommended without camera evidence you can see for yourself. Call (855) 473-8720 for an exact quote.

We Also Serve Cities Near Hillsboro

We look after chimneys in the neighborhoods around Hillsboro too, including Cornelius, Aloha, Forest Grove and Sherwood. If you’re just outside the city line, the same specialist handles your sweep, inspection and repair. Call (855) 473-8720 and we’ll book you in. For more on what we cover, see our chimney repair service page.

Serving Hillsboro, OR – Our Local Coverage Area

We serve Hillsboro and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Hillsboro

Book Chimney Repair in Hillsboro

Whether your chimney is a 1920s masonry flue off East Main Street or a factory-built fireplace in Reed’s Crossing, we can tell you what it needs and what it doesn’t. Sweep, inspect and repair are handled by the same specialist, and HeatShield resurfacing can save you the cost of a full reline when the flue is structurally sound. Call (855) 473-8720 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Chimney Sweep Hillsboro.

Why Hillsboro Chooses Chimney Sweep Hillsboro

We set the standard for chimney repair in Hillsboro.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Hillsboro

Getting your chimney repair project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney repair project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Hillsboro Customers Say

Trusted by homeowners across Hillsboro and surrounding areas.

★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Craig Gallagher
★★★★★

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

Michelle Tran
★★★★★

"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."

Renee Hayes

Ready for Chimney Repair in Hillsboro?

Call now for a free estimate, or request one below. Licensed, insured, and ready to schedule your free estimate in Hillsboro.

(855) 473-8720

Request a Free Estimate in Hillsboro

Tell us about your chimney repair needs. We'll get back to you to set up your free estimate.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7