Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Hillsboro Homeowners
Most chimney problems in Hillsboro stay invisible until they cost real money. A cracked flue tile behind the masonry, a cap that let water in all winter, a fireplace that hasn’t been looked at since the last owners lived here – none of that shows up from the living room. An inspection is how you find out what your chimney actually needs before you spend anything on repairs. Our technicians have up to 11 years of experience, and they work on chimney systems every day, not as a sideline between general contracting jobs. We inspect, sweep and repair in-house, so there’s no handoff to a third party halfway through the job. When you need an honest read on your flue, we can often get out the same day. Call (855) 473-8720 and we’ll book it.
What separates a real inspection from a sales visit is what you walk away with. You get a written report, photos of anything we find, and a clear answer on what needs work now and what can safely wait. If your flue is sound, we’ll tell you that and nothing more. That’s the whole point of offering chimney sweep Hillsboro service as a standalone item rather than a hook for repair work.
Fireplace Inspection
A fireplace inspection looks at the firebox, damper, smoke chamber and the immediate flue connection – the parts you use every time you light a fire. You need one when you’ve moved into a home with unknown fireplace history, when smoke rolls into the room instead of up the flue, or when it’s been more than a year since anyone looked. We check the firebox for cracked refractory brick, test the damper for a proper seal, and confirm the smoke chamber isn’t sending creosote-laden smoke back at you. A typical fireplace inspection in Hillsboro runs $99-$250 depending on how much of the system needs opening up and whether a camera goes down the flue. The written estimate sets the final price before any work starts.
What We Check in the Firebox
Refractory panels crack from heat cycling, and a gap between panels lets fire reach the steel behind them. We check every joint and the mortar at the smoke shelf, since that’s where heat damage often starts. If the panels are sound, we say so.
Damper and Smoke Chamber
The damper has to seal tight when closed and open fully when in use. A warped or rusted damper wastes heat and can push smoke into the room. We look at the smoke chamber above it too, because that sloped passage is where a lot of draft problems begin.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services in Hillsboro cover the full system, from the crown at the top to the firebox at the bottom, and they exist to answer one question honestly: what condition is this chimney in? You need them when you’re buying or selling a home, after a chimney fire, when you’ve noticed a stain or smell, or simply when you don’t know the history. We handle inspections as a standalone service, which means you can book an assessment before committing to any repair. A standard inspection in Hillsboro runs $99-$250, and a Level 2 usually falls in the $150-$400 range. Nothing gets recommended without camera evidence you can see for yourself.
Exterior and Crown
The crown is the concrete cap on top of the chimney, and a cracked crown is the most common way water gets in. We check it along with the flashing where the chimney meets the roof. Both are cheap to address early and expensive to ignore.

Interior Condition Report
We photograph what we find and write up the findings in plain language. You’ll see the flue, the firebox and any damage, with a clear note on what needs attention now. Work that can safely wait is labeled as such.

Chimney Flue Inspection
A chimney flue inspection concentrates on the flue itself – the passage that carries smoke and gases out of the house. You need one whenever there’s a question about draft, after any chimney fire, or before you install or replace an appliance. We run a camera down the flue to check for cracked tiles, gaps at the joints, heavy glazed creosote and any obstruction. This is the check that tells you whether your flue is structurally sound or whether it needs resurfacing or relining. A flue-specific inspection in Hillsboro runs $150-$400, and the written estimate confirms the price first. If the answer is “your flue is fine,” that’s what the report says.
Tile Cracks and Joint Gaps
Clay flue tiles crack from heat and from house settling, and a crack that runs through the wall of a tile lets heat reach combustibles. Joint gaps are just as serious. We map every crack we find so you can see the location and size.
Creosote and Obstructions
Glazed creosote is the hard, shiny stage that’s hardest to remove and the most flammable. We note its stage and thickness. Nests, leaves and collapsed tile pieces get flagged too, since any of them can block the flue.
Chimney Fire
A chimney fire is what happens when creosote inside the flue ignites – sometimes a roaring event you can hear, sometimes a slow burn you never notice. You need an inspection after any suspected chimney fire, even a small one, because the heat can crack tiles and damage the chimney structure in ways you can’t see. We inspect the full flue and firebox for heat damage, check the tiles with a camera, and tell you plainly whether the chimney is safe to use. Post-fire inspection in Hillsboro typically runs $150-$400 depending on how much of the system needs checking. If the structure is sound but the tiles are damaged, HeatShield resurfacing can save you the cost of a full reline, and we’ll tell you honestly which one you actually need.
Signs a Fire Happened
Puffy, honeycombed creosote, warped dampers and discolored caps are the usual evidence. A neighbor hearing a low roar is another. Any of these means the flue needs a look before the next fire.
What We Do After
We sweep out the remains, camera the flue, and check the firebox and smoke chamber for heat damage. The report shows you exactly what the fire affected. You get the safety verdict in writing.
Level 2 Chimney Inspection
A Level 2 chimney inspection is the standard inspection for a home purchase or sale, an appliance change, or after any chimney event – it goes beyond a visual check and includes a camera run through the flue. You need one when the chimney’s history is unknown or when something has changed about how it’s used. We check every accessible part of the system and read the flue interior with a camera, which is where most real problems live. A Level 2 in Hillsboro usually runs $150-$400 depending on flue length and access. The written report and photos come with it, so you have documentation a real estate transaction or insurer can actually use.
When It’s Required
Most home sales involving a wood-burning appliance call for a Level 2, and so does changing from wood to gas or adding an insert. It’s also the right choice after a chimney fire. If you’re unsure which level you need, we’ll explain the difference before booking.
What the Report Covers
The report documents flue condition, firebox and damper, crown and flashing, and any observed defects with photos. It states what needs repair and what can wait. You keep a copy either way.
Chimney Leak
A chimney leak is water getting into the chimney system or the house through the chimney structure, and it’s almost always tracking from the top down. You need an inspection when you see a ceiling stain near the chimney, rust on the damper or firebox, white staining on the masonry, or a musty smell after rain. We trace the source – crown, flashing, cap or masonry joints – rather than assuming it’s one thing. A leak inspection in Hillsboro runs $150-$400, and we quote the fix separately after you’ve seen the evidence. Water damage gets worse with every storm, so this is one to book rather than wait on.
Tracing the Source
Cracked crowns, failed flashing and missing caps all leak, and they look similar from inside the house. We check each from the roof and the interior so the repair matches the actual cause. Guessing here wastes money.
Caps and Components from Gelco
A proper cap keeps rain and animals out while still letting smoke escape. We source caps and components from Gelco, whose professional supply line isn’t available at retail. The right cap solves a lot of leaks on its own.
Chimney Camera Inspection
A chimney camera inspection is a video scan of the flue interior using a specialized camera, and it’s how we see problems that are invisible from above or below. You need one as part of a Level 2, after a fire, or whenever the flue’s condition is in question. We record the run and review it with you, pointing out cracks, gaps, offsets and creosote buildup as they appear. This is the evidence behind every repair recommendation we make. A camera inspection in Hillsboro runs $150-$400 as part of a full assessment, and the footage is yours to keep.
What the Camera Reveals
Hairline cracks, missing mortar joints, spalled tile faces and improper flue connections all show up clearly. So do obstructions like nests or fallen tile. None of it is guesswork once we’ve seen the run.
Evidence You Can Review
We walk you through the footage rather than just handing you a report. If we recommend a repair, you’ll see the reason on screen first. When work can wait, the video shows that too.
Brands We Service
We work with a portfolio of professional-trade brands, and that matters because the components in your chimney system have specific fit and specification requirements. We fit DuraFlex flexible liner systems for new installs and liner replacements, and we know where those liners wear and how they seal at the top plate. We’re certified to apply HeatShield chimney resurfacing for flues that are structurally sound but have damaged tiles, which often avoids a full reline. We also source caps, covers and components from Gelco and Famco, so the parts going on your chimney are professional grade, not what’s on the shelf at the hardware store.
The same goes for Olympia Chimney and Copperfield components – we know the product lines and how they behave in a working chimney. Whether you have DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco or Copperfield, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. A fireplace that smokes instead of drafting usually has a blockage or a flue that’s the wrong size for the opening. Both get worse the longer you burn, and neither fixes itself.
- A strong creosote smell, especially in warm weather. That odor means creosote has built up in the flue. On a warm day the draft reverses and pushes it into the house, which is a clear signal a sweep is overdue.
- Water stains or rust near the chimney. Rust on the damper or a stain on the ceiling tells you water is getting in somewhere above. It gets worse with every storm, so an inspection now costs less than the repair later.
- Visible cracks in the masonry or flue. Cracks in the exterior masonry or white efflorescence staining mean moisture is moving through the structure. Cracks inside the flue are more serious still and need a camera to see.
- A new home with unknown chimney history. If no one can tell you when the chimney was last swept or inspected, assume it hasn’t been. A Level 2 inspection before your first fire settles it.
Our Process, Step by Step
- 1
Talk through the history. We ask what you burn, how often, and what you’ve noticed – smoke, odor, water, noise. That conversation shapes where we focus the inspection. It also tells us whether you’re dealing with maintenance or a real problem.
- 2
Inspect from the top down. We check the crown, cap, flashing and masonry exterior first, then work down through the firebox and damper. Roof-level checks catch the water issues that interior symptoms can’t explain. We never recommend anything we haven’t seen directly.
- 3
Camera the flue. A specialized camera runs the length of the flue and records what it sees. We map cracks, joint gaps, creosote stage and any obstruction as we go. This is the part that makes a recommendation defensible.
- 4
Sweep if it’s due. If the flue needs cleaning, we sweep it as part of the visit, using drop cloths and a sealed vacuum so nothing ends up in your living room. We can do this in the same appointment as the inspection. If it doesn’t need sweeping, we skip it.
- 5
Review the findings with you. We show you the footage and photos, and lay out what needs repair now, what can wait, and what it will cost. You get the written report either way. If resurfacing with HeatShield will save you a reline, we’ll say so.
How Much Does Chimney Inspection Cost in Hillsboro?
A standard chimney inspection in Hillsboro runs $99-$250 for a visual check of the accessible system. A Level 2 inspection with a camera run typically runs $150-$400, and that’s the one to book for a home purchase, an appliance change or after a fire. If a sweep is needed in the same visit, it’s quoted separately on the written estimate. Camera work on a long or awkward flue, roof access that needs extra care, and how much of the system needs opening up all move the number within those ranges. None of this is a fee for showing up – the estimate is free and sets the final price per job.
The way to avoid overpaying is to insist on evidence. Any recommendation for liner or masonry work should come with camera footage you can see, not just a verbal claim. If a technician can’t or won’t show you the flue interior, that’s your signal to get a second opinion. We tell homeowners plainly when work can safely wait, and we’ll never push a reline when HeatShield resurfacing will do the job. Our Hillsboro service covers the whole system, and the written estimate you receive lists what’s included before anything begins. Call (855) 473-8720 for an exact quote – estimates are free.
Our Service Area Near Hillsboro
We inspect chimneys across Hillsboro and the surrounding communities, including Aloha, Cornelius, Forest Grove, Sherwood, Newberg, Wilsonville, Canby, St. Helens and the Portland area. Response times depend on where you are and how the schedule sits that day – Hillsboro and Aloha are usually the quickest, with the outer towns a little further out. Same-day bookings are often possible. Wherever you are in the area, the inspection and the written report work the same way.
Serving Hillsboro, OR – Our Local Coverage Area
We serve Hillsboro and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Hillsboro
A chimney inspection is a professional assessment of your chimney system’s condition, covering the flue, firebox, damper, crown, cap and flashing. It’s how a specialist determines whether the chimney is safe to use and what, if anything, needs repair. We document what we find with photos and camera footage so you can see the evidence yourself. Call (855) 473-8720 to book one – estimates are free.
A standard inspection usually takes 45 minutes to an hour, and a Level 2 with a full camera run can take 60 to 90 minutes. Roof access, long flues and the amount of buildup all affect the time. We’ll give you a realistic window when you book. Call (855) 473-8720 to schedule.
A typical inspection in Hillsboro runs $99-$250, and a Level 2 with camera work usually falls between $150-$400. The flue length, roof access and how much of the system needs checking move the number within those ranges. The written estimate sets the final price, and the estimate itself is free. Call (855) 473-8720 for an exact quote.
Yes. We install and replace DuraFlex flexible liner systems, including the top plate and connection details that determine how well they perform. We also work with Olympia Chimney, Gelco, Famco and Copperfield components. If you’re unsure what’s in your flue, the camera inspection will tell us. Call (855) 473-8720 to book.
Same-day bookings are often possible in Hillsboro. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday – closed Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 473-8720.
Our repair and installation work is backed by a satisfaction guarantee, and the scope of that coverage is spelled out on the written estimate before we start. The inspection itself comes with the documented report and camera footage, which is yours to keep. If something we recommended doesn’t hold up, we make it right. Call (855) 473-8720 with questions.
Clear the hearth and a few feet in front of the fireplace so we have working room, and make sure we can get to the roof access or attic if needed. Don’t burn anything for at least 24 hours before the visit, so the flue isn’t hot. Tell us about any smoke, odor or water issues when you book – it helps us focus the inspection. Call (855) 473-8720 to schedule.
Schedule Your Chimney Inspection Service in Hillsboro Today
If it’s been more than a year since anyone looked at your chimney, or you’ve noticed smoke, odor or a water stain, book an inspection and find out where you actually stand. You’ll get camera evidence, a written report, and an honest answer on what needs work now. Call (855) 473-8720 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Hillsboro.